R3-500 RECEIVER

The basic R3-500 can be used on all clay target machines with the exception of machines with a solenoid release (generally regulation Skeet and ATA Trap machines.) If this is the case be sure to indicate this by ordering a R3-500F. The main difference is that the hold time of the receiver is reduced to a ¼ of a second so that the solenoid does not stay activated for too long. Installing a standard R3 would cause your solenoid to stay open too long and cause your machine to fire more than once and possibly damage your machine. Also indicate when ordering if your machine is powered by 110v power source, as this would require a 12VDC adapter.

Features At-a-glance:

• 350 yard range
• Attaches easily to any trap*
• Use up to 32 receivers on one course
• Minimal battery usage - only 2.1 m/a
• Works on 12, 24, or 110 volts from the trap**
• Works with all Long Range transmitters
• *R3-500F available for traps with solenoid release
  **12VDC adapter required for 110V Power sources

T3C-500 MULTI TRAP TRANSMITTER

The T3C-500 is usually referred to as our back up 5-Stand controller. It comes standard with a 12 Volt charger and NiMh rechargeable batteries for hours of use on a single charge. It has two charging ports located on either side of the unit. Either one can be used for recharging.

This unit works great for many applications and has multiple functions. It will operate up to four 5-Stands with eight traps per field. When used in 5-Stand mode traps can be fired by simply pressing the number of trap you want to fire. To fire a true pair, press the true pair button followed by the two traps and press fire.

Additional features of the T3C-500 include: a 0 to 7 second delay; a wobble trap adjustment that will independently turn your horizontal and vertical functions on or off in addition to nudging the machine slightly to change the target presentation.

The T3C-500 will also count all of the targets that were thrown by an individual or a group. When used in Sporting Clay mode you can walk through your course and enter the station you wish to shoot. Once you have chosen a station the transmitter will know what receivers it needs to throw without interfering with the group in front of or behind you. This allows you to send multiple groups out on the course at one time. You can also send and individual out on the course and set a delay so that they can also practice by themselves. This unit when used in Sporting Clay mode can also be used as a counter. It can be used to track targets that have been thrown by an individual or a group. By using this unit you can save on cost by eliminating trapper fees and also charge by the amount of targets that are thrown. (No more free birds).

A Voice upgrade is available on this unit.

VT3C-500 Transmitter

• Hand-held unit
• Operates 1 - 32 traps
• Sporting Clays and 5-Stand Mode
• Operates on NiMH rechargeable Battery

T3D-500 MULTI STATION TRANSMITTER

The T3D-500 is our most sophisticated controller, featuring 4 modes: 5-Stand Mode. Pre-programmed with 3 permanent 5-Stand levels utilizing 6 traps or program your own custom levels utilizing up to 8 traps per station. Select a program, enter the number of players, and the unit will begin on stand 1, shooter 1 - automatically advancing to the next shooter and next set of targets. A "No Bird" button will adjust the program and re-throw the selected targets in the event of a broken target.

Flush/Flurry Mode. When in the flush mode the T3D will ask how many players, how many traps and how many targets. All traps will fire initially then random traps will throw until the specified number of targets have been released. A "pause" function will stop the game if desired.

Manual Mode. This is the basic mode, which allows you to choose any trap 1-8 and throw them as a single, or choose two and throw pairs.

System Mode. Features additional functions such as programming delays; setting receiver activation time or the amount of signal transmitted; system reset; changing the User Code; re-allocating the buttons and receivers; and setting the time.

The T3D requires the use of a 12V adapter wall plug or you can use a set of Alligator clips and connect it directly to a 12V car battery. Adapter and Alligator clips are supplied with the unit.

• Operates two traps
• Simple setup
• 75+ yard range
• Two receivers in NEMA waterproof cases
• Uses small 12 volt battery - 3 included
• No Dip switches to set
• Guaranteed true pairs every time!

• Operates two traps
• Simple setup
• 75+ yard range
• Two receivers in NEMA waterproof cases
• Uses small 12 volt battery - 3 included
• No Dip switches to set
• Guaranteed true pairs every time!

• Operates one trap
• Simple setup
• 75+ yard range
• NEMA waterproof case
• Uses small 12 volt battery
• No dip switches to set

• Operates one trap
• Simple setup
• Operates one trap
• 75+ yard range
• NEMA waterproof case
• Uses small 12 volt battery
• Controls vertical and horizontal wobble functions
• Features "nudge" control